Chain Flogger
A flogger with tails made from metal chain rather than leather or rubber. The chain tails produce a heavy, biting impact with a sharp edge sensation from the individual links. The weight of metal means a chain flogger hits harder per tail than most leather equivalents at the same swing speed. The sensation is intense and the marks produced are more significant than most other flogger types.
WHY PEOPLE USE IT
The chain flogger is a heavy-end implement chosen for scenes that require significant pain or impact. The metallic sound on contact, the cold weight of the tails before use, and the visual of chain in motion all contribute to its use in scenes where the aesthetic of severity is part of the point. It is not an entry-level implement.
HISTORY
The history of the flogger and its development into a purpose-built BDSM implement is covered on the Flogging entry.
WHAT TO LOOK FOR
Chain type and link size determine the sensation. Fine chain produces a sharper, more biting impact; heavier chain produces more thud. Check that all links are fully closed with no sharp burrs or open ends that could cut skin. The collar attachment takes extreme stress with metal tails and must be very secure. Handle weight needs to balance the considerable weight of the tails. A well-made chain flogger is significantly heavier than a leather equivalent and requires more wrist strength to control safely.
Check that the chain does not tangle when in use. Very long or very fine chain can knot around itself during a swing, which changes where impact lands unpredictably.
TRUSTED BRANDS
Chain floggers are most commonly found from specialist BDSM metalworkers and leatherworkers who combine metal and leather construction. Less widely manufactured commercially than leather floggers. Stockroom and some specialist fetish suppliers carry them.
WHERE TO BUY IT
Available from specialist kink retailers and specialist craftspeople. Not widely stocked.
- Standard: $60–$130
- Handmade or heavy construction: $130–$250
Rough prices as of July 2026.
HOW TO LOOK AFTER IT
Wipe chain tails dry after use. Metal will rust if left damp. Inspect every link before each use for burrs, open ends, or deformed links. A damaged link that catches skin instead of striking it is a significant risk. If a link has deformed or developed a sharp edge, remove or repair it before the next session. Store untangled, with tails separated, in a dry location. A light coat of metal lubricant on the chains can prevent surface rust with regular use.